Engineering Resources:
Dimension drawing: trinado_drwg_dim.pdf
Assembly drawings: trinado_drwg_assmbly.pdf
Parts lists: trinado_tab_partslist.pdf   

Warranty Info

gts_5001_020107.pdf

Incoming air is trapped by the pair of tri-lobe impellers. Simultaneously, pressurized air is being discharged (right). As the lower impeller passes the wrap-around flange, WHISPAIR™ jets equalize pressure between trapped air and the discharge area, aiding impeller movement and reducing power requirements. Impellers move air into the discharge area (right). Backflow is controlled, resulting in reduction of noise relative to conventional blowers.

tri_lobe_princ_op.pdf

• Casing-The casing is of one piece close-grained cast iron construction. The casing is heavily ribbed to prevent distortion under the most severe operating conditions and incorporates the ROOTS® Whispair™ feature for reduced pulsation, horsepower and noise levels
• Impellers-The closed-end impellers are made from ductile iron with high tensile strength, and operate without liquid sealing or lubrication
• Shafts-The shafts are 3" diameter alloy steel forgings flange connected to the impeller body
• Timing Gears-The impellers are timed by a pair of alloy steel spur gears that operate in an oil bath. Bearings-The impeller/shaft assemblies are supported at each end by antifriction bearings
• Lubrication-A patented jet spray oil slinger system provides lubrication to gears and bearings